subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Trunk / Liftgate Lock Cylinder > < Trunk Lid Lock Assembly|Page 5739
Page 1
background image

Trunk / Liftgate Latch Release Cable: Service and Repair

TRUNK LID OPENER

REMOVAL

1. Remove the rear seat.
2. Remove the center pillar lower trim and side sill cover on the passenger side. Remove the rear pillar lower trim. Pull back the floor mat. Remove

the clip holding the cable.

3. Remove the bolt. Remove the opener pull handle.
4. Remove the cable from the opener pull handle.
5. Remove the striker from the trunk lid.

6. Remove the cable from the striker.

INSTALLATION

Install in the reverse order of removal.

Trunk / Liftgate Lock Cylinder > < Trunk Lid Lock Assembly|Page 5739