Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
Front Fender: Service and Repair
FENDER PANEL
REMOVAL
1. Disconnect the ground terminal from battery.
2. Remove the side sill spoilers.
3. Remove the front bumper face.
4. Remove the mud guard.
5. Loosen the bolts to remove front fender.
INSTALLATION
1. Install in the reverse order of removal.
2. When the fender panel is installed, the clearance between fender panel and hood or front fender must be equal.
Tightening torque: 7.35 N.m (0.75kgf-m, 5.4 ft-lb)
