subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Electronic Brake Control Module > < Throttle Position Sensor/Switch, M/T|Testing and Inspection|Page 4286
Page 1
background image

ABS Light: Testing and Inspection

INSPECTION

1) When the ABS warning light does not illuminate in accordance with this illumination pattern, there must be an electrical malfunction.
2) When the ABS warning light remains constantly OFF, repair the ABS warning light circuit or diagnosis circuit. 

NOTE:  Even though the ABS warning light does not go out 1.5 seconds after it illuminates, the ABS system operates normally when the warning
light goes out while driving at approximately 12 km/h (7 MPH). However, the Antilock brakes do not work while the ABS warning light is
illuminated.

Electronic Brake Control Module > < Throttle Position Sensor/Switch, M/T|Testing and Inspection|Page 4286