Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
2) Connect the operating rod to brake pedal with clevis pin and snap pin.
3) Connect the vacuum hose to brake booster.
4) Mount the master cylinder onto brake booster.
5) Connect the brake pipes to master cylinder.
6) Connect the electric connector for brake fluid level indicator.
7) Adjust the operating rod of brake booster.
Standard: L
LHD model: 144.6 mm (5.69 inches)
RHD model: 173.2 mm (6.82 inches)
If it is not in specified value, adjust it by adjusting the brake booster operating rod.
8) Measure the clearance between threaded end of stop light switch and stopper.
If it is not in specified value, adjust it by adjusting the position of stop light switch.
CAUTION: Be careful not to rotate the stop light switch.