Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
Sub fan (B)
15. Connect the connectors to radiator main fan (A) and sub fan (B) motors.
16. Install the under cover.
17. Lower the vehicle.
18. Connect the battery ground cable.
19. Fill coolant.
2. TURBO MODEL
1. Install the water pump onto the left-hand cylinder head.
CAUTION:
^
Replace gasket with a new one.
^
When installing water pump, tighten bolts in two stages in alphabetical sequence as shown in figure.
Tightening torque:
First: 12 Nm (1.2 kgf-m, 8.7 ft. lbs.)
Second: 12 Nm (1.2 kgf-m, 8.7 ft. lbs.)
2. Install the tensioner bracket.
Tightening torque: 25 Nm (2.5 kgf-m, 18.1 ft. lbs.)
