subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Intake Manifold|Removal and Installation|Page 1356 > < Intake Manifold|Removal and Installation|Page 1354
Page 3
background image

3. Remove the bolts which hold power steering pipes onto the intake manifold protector.

NOTE:  Do not disconnect the power steering hose.

4. Remove the bolts which install power steering pump bracket.

5. Disconnect the connector from the power steering pump switch.

6. Remove the power steering tank from the bracket by pulling it upwards.

7. Place the power steering pump on the right side wheel apron.

8. Disconnect the spark plug cords from the spark plugs.

Intake Manifold|Removal and Installation|Page 1356 > < Intake Manifold|Removal and Installation|Page 1354