Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
11. Install the purge control solenoid valve.
Tightening Torque: .................................................................................................................................................... 16 Nm (1.6 kgf-m, 11.8 ft. lbs)
12. Connect the hoses to the purge control solenoid valve.
CAUTION: Carefully connect the evaporation hoses.
13. Install the engine harness onto the intake manifold.
14. Connect the connectors to the fuel injectors and purge control solenoid valve.
15. Hold the engine harness by harness band (A) and harness bracket (B).
Tightening Torque: .................................................................................................................................................... 16 Nm (1.6 kgf-m, 11.8 ft. lbs)
NOTE: Do not use harness band on harnesses where they are supposed to be protected by the fuel pipe protector.
16. Install the fuel pipe protector RH.
