subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Intake Manifold|Removal and Installation|Page 1375 > < Intake Manifold|Removal and Installation|Page 1373
Page 11
background image

Tightening Torque: ....................................................................................................................................................  19 Nm (1.9 kgf-m, 13.7 ft. lbs)

17. Install the fuel pipe protector LH.

Tightening Torque: ....................................................................................................................................................  19 Nm (1.9 kgf-m, 13.7 ft. lbs)

18. Connect the pressure regulator vacuum hose to the intake manifold.
19. Install the air assist injector solenoid valve to the bracket.
20. Install the throttle body to the intake manifold.
21. Install the intake air temperature and pressure sensor. 
22. Connect the connector to the intake air temperature and pressure sensor.

23. Install the ignition coil and ignitor assembly.
24. Connect the connector to the ignition coil and ignitor assembly.

25. Install the engine ground terminal to the intake manifold.

Intake Manifold|Removal and Installation|Page 1375 > < Intake Manifold|Removal and Installation|Page 1373