subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Water Pump|Page 1619 > < Water Pump|Page 1617
Page 7
background image

5. Install the belt idler No. 2.

Tightening torque: 39 Nm (4.0 kgf-m, 28.9 ft. lbs.) 

6. Install the automatic belt tension adjuster which tension rod is holded with pin.
7. Install the timing belt. 
8. Install V-belts.
9. Install the radiator main fan and sub fan motor assemblies.

10. Install the reservoir tank.

11. Connect the overflow hose.

12. Install the air intake duct.
13. Lift-up the vehicle.

14. Connect the radiator outlet hose and heater hose to the water pump.

Main fan (A)

Water Pump|Page 1619 > < Water Pump|Page 1617