Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
Turn the tie-rod to adjust the steering angle of both inner and outer wheels.
CAUTION:
^
Check the toe-in.
^
Correct the boot if it is twisted.
7. THRUST ANGLE
^
Inspection
1. Position the vehicle on a level surface.
2. Move the vehicle 3 to 4 meters directly forward.
3. Determine the locus of both front and rear axles.
4. Measure the distance "L" between center line of loci of the axles.
Thrust angle: Less than 20' when "L" is equal to or less than 15 mm (59 inch).
^
Adjustment
1. Make the thrust angle adjustments by turning toe-in adjusting bolts of rear suspension equally in the same direction.
2. When one rear wheel is adjusted in a toe-in direction, adjust the other rear wheel equally in toe out direction, in order to make the thrust angle
adjustment.