subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Refrigerant Leak Check|Page 985 > < Refrigerant Leak Check
Page 2
background image

After the test is finished, reconnect the drain hose.

12. Turn the ignition key to ON position, and run the blower at high speed for 1 minute. Stop the blower to check the ventilation grille on the

instrument panel. While moving the tester closer to the grille, run the blower for 1 or 2 seconds, then stop it. Check the grille at that point for at
least 10 seconds.

13. Check the valve in the service port.

14. Visually check the rubber seal in the service port cap.

Refrigerant Leak Check|Page 985 > < Refrigerant Leak Check