Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
Intake Air Temperature Sensor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Disconnect the spark plug cord from the ignition coil and ignitor assembly.
3. Disconnect the connector from the intake air temperature and pressure sensor
4. Remove the intake air temperature and pressure sensor.
INSTALLATION
Install in the reverse order of removal.
Tightening Torque: ......................................................................................................................................................... 3.4 Nm (0.35 kgf-m, 2.5 ft. lbs)