subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Throttle Position Sensor > < Front Oxygen (A/F) Sensor|Page 2463
Page 2
background image

Anti-seize compound:  SS-30 by JET LUBE

2. Install the rear oxygen sensor.

Tightening Torque: ....................................................................................................................................................  21 Nm (2.1 kgf-m, 15.2 ft. lbs)

3. Connect the connector to the rear oxygen sensor.
4. Lower the vehicle.

5. Connect the battery ground cable.

Throttle Position Sensor > < Front Oxygen (A/F) Sensor|Page 2463