Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
13. Disconnect the accelerator cable stopper from bracket.
14. Separate the accelerator cable and bracket.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
^
If cable clamp is damaged, replace it with a new one.
^
Never fall to cover the outer cable end with boot.
^
Be careful not to kink the accelerator cable.
^
Always use new clevis pins.
DISASSEMBLY
1. Remove the clip, and then remove the accelerator pedal from the bracket.
2. Pull out the spring pin, and then remove the accelerator pedal from the accelerator pedal lever.
ASSEMBLY
Assemble in the reverse order of disassembly.
CAUTION: Clean and apply grease to the spacer and inside bore of a accelerator pedal.
