subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Intake Air Duct > < Idle Air Control|Page 2724
Page 1
background image

Idle Speed/Throttle Actuator - Electronic: Service and Repair

Idle Air Control Solenoid Valve

REMOVAL

1. Disconnect the battery ground cable.

2. Disconnect the connector from the idle air control solenoid valve.

3. Remove the idle air control solenoid valve from the throttle body.

INSTALLATION

Install in the reverse order of removal.

NOTE:  Always use new gasket.

Tightening Torque: .........................................................................................................................................................  1.6 Nm (0.16 kgf-m, 1.2 ft. lbs)

Intake Air Duct > < Idle Air Control|Page 2724