subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Transmission Position Switch/Sensor, A/T|Specifications|Page 3066 > < Transmission Position Switch/Sensor, A/T|Specifications|Page 3064
Page 2
background image

12. Remove the bolts.

13. Move the range select lever to parking position (left side).

14. Remove the inhibitor switch from transmission.
15. Disconnect the inhibitor switch harness from inhibitor switch.

D: INSTALLATION

1. Connect the inhibitor switch harness to inhibitor switch.

2. Install the inhibitor switch to transmission case.
3. Move the range select lever to neutral position. 

Transmission Position Switch/Sensor, A/T|Specifications|Page 3066 > < Transmission Position Switch/Sensor, A/T|Specifications|Page 3064