Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
Impact Sensor: Service and Repair
Side Airbag Sensor
REMOVAL
1. Turn the ignition switch OFF.
2. Disconnect the ground terminal from battery, and wait for at least 20 seconds before starting work.
3. Remove the outer belt (FRONT).
4. Using T30 TORX (R) bit (Tamper resistant type), remove the two TORX (R) bolts.
5. Detach the side airbag sensor, and then disconnect the airbag connector.
INSTALLATION
CAUTION: Use new TORX (R) bolts during re-assembly. Install in the reverse order of removal.
