Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
1 of 2
2 of 2
4. Suspend a thread from wheel arch (point "A" in figure) to determine the point directly above center of spindle.
5. Measure the distance between measuring point "A" and center of spindle.
2. CAMBER
^
Inspection
1. Place the front wheel on turning radius gauge. Make sure the ground contacting surfaces of front and rear wheels are set at the same height.
2. Set the ST into the center of the wheel, and then install the wheel alignment gauge.