Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
CAUTION:
^
When loosening or tightening the adjusting bolt, hold the bolt head and turn self-locking nut.
^
Discard the loosened self-locking nut and replace with a new one.
2. Turn the adjusting bolt head until toe-in is at the specification.
NOTE: When the left and right wheels are adjusted for toe-in at the same time, the movement of one scale graduation changes toe-in by
approximately 1.5 mm (0.12 inch).
3. Tighten the self-locking nut.
Tightening torque: 100 Nm (10.2 kgf-m, 74 ft. lbs.)
6. STEERING ANGLE
^
Inspection
1. Place the vehicle on a turning radius gauge.
2. While depressing the brake pedal, turn the steering wheel fully to the left and right. With the steering wheel held at each fully turned position,
measure both the inner and outer wheel steering angle.
Steering angle:
^
Adjustment
