Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
ST 34099FA120 INSTALLER & REMOVER SEAL
CAUTION:
^
Do not apply a force to end surface of valve housing.
^
Do not reuse oil seal after removal.
11. Remove the snap ring using snap ring pliers.
CAUTION:
^
Do not reuse removed snap ring.
^
Be careful not to scratch pinion and valve assembly.
12. Press out the bearing together with the back up washer using pipe of I.D. 38.5 to 39.5 mm (1.516 to 1.555 inch) and press.
CAUTION: Do not reuse removed bearing.
13. Remove the oil seal.
CAUTION: Do not reuse removed oil seal.
D: ASSEMBLY
1. RACK HOUSING ASSEMBLY