Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
17. Place the OTC 314308 with a washer onto the puller bolt. This will be placed into the bearing housing. Apply the included special grease to the
puller bolt, once during disassembly and again during reassembly.
18. The OTC 311887 with washer and nut will be placed onto the opposite end of the puller bolt after it has been inserted into the bearing housing. If
the wrong side of OTC 311887 is placed against the bearing the tool will become jammed into the inner race.
