Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
Apply the liquid gasket into the non-threaded holes as shown.
Install oil pan and bolts. Tightening torque: 43 +/- 4 in.lb. (5 +/- 0.5 Nm).
Reinstall exhaust heat shield cover (H6 Models only).
Tap the heat shield with a rubber or plastic hammer to confirm that it will not rattle.
Note:
In case the shield rattles, reposition the shield and retighten it.
Install ATF
Lower the vehicle from the lift.
Pour 5.5 quarts (5.2 liters) of Dexron III ATF into filler pipe.
Check for oil leaks.
Check oil level and oil level gauge. If oil level is incorrect, adjust accordingly.
Note:
The level of ATF varies with fluid temperature. Pay attention to the fluid temperature when checking oil level.
