subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Shifter A/T|Removal and Installation|Page 3508 > < Shifter A/T|Removal and Installation
Page 2
background image

3. Select lever and indicator positions are matched.

11. Check the shift-lock system.

1. Ensure the ignition switch rotates from "ACC" to "LOCK" when the select lever is set at "P". Also check that ignition key can be removed only

from the "LOCK" position.

2. Ensure the select lever moves from "P" to any other position when the brake pedal is depressed with ignition key set at "ON" or "START".

12. Install heat shield cover. (If equipped) 
13. Install rear exhaust pipe and muffler.

Shifter A/T|Removal and Installation|Page 3508 > < Shifter A/T|Removal and Installation