subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Valve Body, A/T|Specifications|Page 3574 > < Valve Body, A/T|Specifications
Page 1
background image

Valve Body: Service and Repair

Control Valve Body 

REMOVAL 
1. Clean transmission exterior. 

2. Drain ATF completely.

NOTE:  Tighten ATF drain plug after draining ATF.

Tightening torque: 25 Nm (2.5 kgf-cm, 18.1 ft. lbs.)

3. Remove the oil pan.

NOTE:  
^

Remove and clean the magnet.

^

Remove the old gasket on the oil pan and transmission case completely.

4. Disconnect duty solenoids and ATF temperature sensor connectors. Remove connectors from clip and disconnect connectors.

Valve Body, A/T|Specifications|Page 3574 > < Valve Body, A/T|Specifications