Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
1. Install in the reverse order of removal.
NOTE: Before installing the operating cylinder, apply grease (SUNLIGHT 2: P/N 003602010) to the contact point of release lever and operating
cylinder.
Tightening torque:
T1: 18 Nm (1,8 kgf-cm, 13.0 ft. lbs.)
T2: 37 Nm (3.8 kgf-cm, 27.5 ft. lbs.)
Non-turbo model
Turbo model
NOTE:
^
Be sure to install the clutch hose with the mark side facing upward.
^
Be careful not to twist the clutch hose during installation.
2. After bleeding air from the operating cylinder, ensure that the clutch operates properly.