Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
1. NON-TURBO MODEL
CAUTION: Before or during assembling, lubricate the following points with a light coat of grease.
^
Contact surface of lever and pivot
^
Contact surface of lever and bearing
^
Transmission main shaft spline (Use grease containing molybdenum disulphide.)
^
Contact surface of lever and operating cylinder
1. While pushing the release lever to pivot and twisting it to both sides, fit the retainer spring onto the constricted portion of pivot.
NOTE:
^
Apply grease (SUNLIGHT 2: P/N 003602010) to the contact point of release lever and operating cylinder.
^
Confirm that the retainer spring is securely fitted by observing it through the main case hole.
2. Install the release bearing and fasten it with two clips.
3. Install the release lever seal.
4. Intall the transmission assembly.
1. TURBO MODEL
1. Install the release bearing on transmission.
2. Insert the release fork into release bearing tab.
