subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Drive Axles, Bearings and Joints > < Rear Differential Front Oil Seal|Page 3762
Page 4
background image

2. Install the spline shaft until the spline portion is inside the side oil seal using ST. 

ST 28099PA090 SIDE OIL SEAL PROTECTOR

3. Remove ST.

ST 28099PA090 SIDE OIL SEAL PROTECTOR

13. Hereafter, reassemble in the reverse order of disassembly.
14. Fill differential carrier with gear oil to the filler plug level. 

Drive Axles, Bearings and Joints > < Rear Differential Front Oil Seal|Page 3762