subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Fluid - M/T|Capacity Specifications|Page 3899 > < Fluid - M/T|Capacity Specifications|Page 3897
Page 1
background image

Fluid - M/T: Testing and Inspection

INSPECTION

1. Park vehicle on a level surface.
2. Turn the ignition switch to OFF, and wait until the engine cools.
3. Remove the oil level gauge and wipe it clean.
4. Reinsert the level gauge all the way. Be sure that the level gauge is correctly inserted and in the proper direction.

5. Pull out the oil level gauge again and check the oil level on it. If it is below the lower level, add oil through the oil level gauge hole to bring the

level up to the upper level.

Fluid - M/T|Capacity Specifications|Page 3899 > < Fluid - M/T|Capacity Specifications|Page 3897