subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Transmission Mount, M/T > < Throttle Position Sensor/Switch, M/T|Testing and Inspection|Page 3988
Page 2
background image

1. BACK-UP LIGHT SWITCH AND NEUTRAL POSITION SWITCH

1. Install the back-up light switch and neutral position switch with harness.

Tightening torque: 24.5 Nm (2.5 kgf-cm, 18.1 ft. lbs.)

2. Connect the connector of back-up light switch and neutral position switch.
3. Install the air intake duct and cleaner case. (Non turbo model) 
4. Install the intercooler. (Turbo model) 
5. Connect the battery ground terminal.

Transmission Mount, M/T > < Throttle Position Sensor/Switch, M/T|Testing and Inspection|Page 3988