Impreza 2.5 RS Sedan AWD F4-2.5L SOHC (2002)
Transmission Position Switch/Sensor: Service and Repair
C: REMOVAL
1. Set up the vehicle on the lift.
2. Move the select lever to neutral position.
3. Remove the air cleaner case. (Non-turbo model)
4. Remove the intercooler. (Turbo model)
5. Disconnect the inhibitor switch connector.
6. Remove the inhibitor switch connector from stay.
7. Lift-up the vehicle.
8. Remove the front exhaust pipe with center exhaust pipe. (Non-turbo model)
9. Remove the center exhaust pipe. (Turbo model)
10. Remove the snap pin from range select lever.
11. Remove the plate assembly from transmission case.
