Subaru Workshop Service and Repair Manuals

Timing Belt Tensioner: Specifications

TENSIONER ADJUSTER: 

Protusion of Adjuster Rod .........................................................................................................................................  15.4 - 16.4 mm (0.606 - 0.646 inch)

TENSIONER: 

Spacer O.D. ..........................................................................................................................................................................................  16 mm (0.63 inch)
Tensioner Bush I.D. .....................................................................................................................................................................  16.16 mm (0.6362 inch)

Clearance Between Spacer and Bushing: 

Standard ......................................................................................................................................................  0.117 - 0.180 mm (0.0046 - 0.0071 inch)
Wear Limit .............................................................................................................................................................................  0.230 mm (0.0091 inch)

Side Clearance of Spacer: 

Standard ..........................................................................................................................................................  0.37 - 0.54 mm (0.0146 - 0.0213 inch)
Wear Limit ...................................................................................................................................................................................  0.8 mm (0.031 inch)

TORQUE

Timing Belt Tensioner Bolts ............................................................................................................................................  23 - 27 Nm (16.7 - 19.5 ft. lbs.)