Impreza Brighton Coupe AWD F4-2.2L SOHC (1997)
Alignment: Service and Repair
Preliminary Checks
Check, adjust and/or measure wheel alignment in accordance with procedures indicated:
Camber
TOOL REQUIRED
-
ST 927380000 ADAPTER
1. Place front wheel on turning radius gauge. Make sure ground contacting surfaces of front and rear wheels are set at the same height.
2. Set ST into the center of the wheel, and then install the wheel alignment gauge.
Caster
TOOL REQUIRED
-
ST 927380000 Adapter
1. Place front wheel on turning radius gauge. Make sure ground contacting surfaces of front and rear wheels are set at the same height.
