Impreza Brighton Coupe AWD F4-2.2L SOHC (1997)
1. Using the Special Tool (ST) 1, ST2 and ST3 as those used in disassembling, assemble the piston (3), spring retainer (5), and snap ring (6).
ST1 398673600 Compressor, or equivalent.
ST2 398177700 Installer, or equivalent.
ST3 399893600 Pliers, or equivalent.
2. Install the driven plate (thinner) (7), drive plates (8), driven plates (thicker)(9), and retaining plate (10) in that order. Then attach the snap ring
(11).
3. Checking operation:
Apply compressed air intermittently to the oil hole, and check the high clutch for smooth operation.
4. Measuring clearance (Retaining plate selection):
Standard value: 1.8 - 2.2 mm (0.071 - 0.087 inch)
Allowable limit: 2.6 mm (0.102 inch)
NOTE: Before measuring clearance, place the same thickness of shim on both sides to prevent retaining plate from tilting.
