subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Control Module HVAC|Description and Operation|Page 4017 > < Control Module HVAC|Description and Operation
Page 2
background image

2. THERMO CONTROL AMPLIFIER

The thermo control amplifier disconnects the magnet clutch circuit to prevent the evaporator from becoming frosted when the temperature of the
evaporator fin drops close to "2 °C (36 °F)". As the evaporator is cooled, the thermistor (located on the evaporator fin) interrupts the "base"
current of the amplifier. This in turn deenergizes the A/C relay coil, which in turn disconnects the magnet clutch circuit.

3. ACCELERATION CUT SYSTEM

The A/C switch turns the A/C system on or off. The on-off operation of the switch is transmitted to the ECU.

The A/C cut relay breaks the current flow to the compressor, through the use of an output signal from the ECU, for a certain period of time when a
"full-throttle" signal (emitted from the throttle sensor) enters the ECU while the compressor is operating. This prevents the degradation of
acceleration performance and stabilizes the main fuse box located on the left side of the engine compartment.

Control Module HVAC|Description and Operation|Page 4017 > < Control Module HVAC|Description and Operation