Impreza Coupe AWD F4-1820cc 1.8L SOHC (1995)
INSTALLATION
1) Pass inner cable through toe board hole and route inside driver compartment. Install cable bushing on accelerator pedal end.
2) While turning accelerator cable counterclockwise, transfer it to driver compartment through toe board hole.
3) Connect accelerator cable to upper holder of accelerator pedal.
4) Install clip inside engine compartment.
5) To install cable to throttle cam, reverse the order of the removal procedures.
Tightening torque:
14 ± 4 Nm (1.4 ± 0.4 kg-m, 10.1 ± 2.9 ft-Ib.)
6) Adjustment after cable installation.
