Impreza Coupe FWD F4-1820cc 1.8L SOHC (1995)
10. Latch
1. Remove trim panel.
2. Disengage rod from holder (= key cylinder).
3. Remove bolts from auto-door lock actuator.
4. Remove bolts from latch, and detach latch.
5. Disconnect rear gate switch connector.
6. Disconnect auto-door lock actuator connector.
7. Detach latch.
11. Rear gate outer handle
1. Remove trim panel.
2. Remove latch.
3. Remove two nuts used to hold outer handle to the inside of rear gate, and detach outer handle.
CAUTION: Be careful not to damage packing when removing outer handle.
12. Key cylinder
1. Remove trim panel.
2. Disengage rod from holder.
3. Remove retaining spring from key cylinder, and detach key cylinder from outside.
13. Striker
1. Remove rear skirt trim.
2. Remove two bolts from striker and detach striker.
INSTALLATION
Install in reverse order of removal. Some special items will be described.
