subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Cruise Control Switch|Description and Operation|Page 4367 > < Speed Control Cable <--> [Cruise Control Servo Cable]|Adjustments
Page 1
background image

Cruise Control Switch: Description and Operation

MAIN SWITCH

-

The main switch is the main power supply switch of the cruise control module and has a built-in power indicator and night illumination light.

-

When the ignition switch is placed in the OFF position with the main switch at ON, the main switch is also simultaneously forced to OFF In this
condition, even if the ignition switch is placed in the ON position again, the main switch will stay in the OFF state.

SUB SWITCH (SET LEVER)

-

When the vehicle is in the cruise control mode, the sub switch controls its operation. It inputs SET/COAST signal, ACCEL/RESUME signal or
CANCEL signal to the cruise control module.

-

The sub switch is located on the right side of the steering wheel and can be operated without releasing your hand from the steering wheel.

-

The sub switch is an auto return lever type.

Cruise Control Switch|Description and Operation|Page 4367 > < Speed Control Cable <--> [Cruise Control Servo Cable]|Adjustments