Impreza Coupe FWD F4-1820cc 1.8L SOHC (1995)
Rocker Arm Assembly: Service and Repair
REMOVAL
1. Disconnect PCV hose and remove rocker cover.
2. Removal of valve rocker assembly.
Fig. 36 Rocker Assembly Bolt Loosening Sequence
A Remove bolts 2 through 4 in numerical sequence.
CAUTION: Leave two or three threads of bolt engaged to retain valve rocker assembly.
B Equally loosen bolts 5 through 8 all the way, being careful that knock pin is not gouged.
C Remove valve rocker assembly.
CAUTION: Locate valve rocker assembly with air vent (on rocker arm) facing upward or dip it in engine oil after removal.
