subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Fuses and Circuit Breakers > < Air Bag(s) Arming and Disarming|Service Precautions|Page 1098
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair

AIR BAG SYSTEM DISARMING AND ARMING

WARNING: Before performing any service procedures in or around SRS related components and/or harnesses, always disarm the air
bag system.

Disarming
1.  Place ignition switch in Off position/
2.  Disconnect battery ground cable, then positive cable.
3.  Wait 20 seconds before beginning repair procedures.

Arming
1.  Ensure no one is inside vehicle.
2.  With ignition switch in Off position, connect battery positive cable, then the ground cable.
3.  Wait at least 20 seconds, then turn ignition switch to on position and note air bag warning lamp operation. Lamp should light for

approximately eight seconds, then go off. If lamp remains illuminated or fails to light, an air bag system malfunction is indicated. Diagnose and
repair as necessary.

 

Fuses and Circuit Breakers > < Air Bag(s) Arming and Disarming|Service Precautions|Page 1098