Impreza Coupe FWD F4-1820cc 1.8L SOHC (1995)
INSTALLATION
#1 Fuel Filler Pipe Clamp - #2 Air Vent Pipe Clamp
1.
Set saucer (#1) with rubber packing (#3), and insert fuel filler pipe into hole from inside fender apron.
2.
Align holes in filler pipe with holes in set cup (2) and tighten screws.
3.
Install fuel filler hose about 28mm (1 inch) over end of filler pipe and tighten clamp.
4.
Install air vent hose about 28mm (1 inch) over end of pipe and tighten clamp.
NOTE: Make sure clamps do not rub on suspension components.
5.
Install fuel filler pipe protector.
6.
Install R.R. wheel.
Fuel Pump Torque Sequence
7.
Re install fuel pump, access cover, carpet and seats.
Fastener torque: 3 - 6 Nm (2.2 - 4.3 ft lbs)
8.
Refill fuel tank.