Impreza Coupe FWD F4-1820cc 1.8L SOHC (1995)
Battery: Service and Repair
Removal and Installation
1. Disconnect the positive (+) terminal after disconnecting the negative (- ) terminal of battery.
2. Remove flange nuts from battery rods and take off battery holder.
3. Remove battery.
Tightening torque:
2.5 - 4.4 N.m (25 - 45 kg.cm, 22 - 39 in.lb)
NOTE:
-
Clean battery cable terminals and apply grease to retard the formation of corrosion.
-
Connect the positive (+) terminal of battery and then the negative (- ) terminal of the battery.
