Impreza Coupe FWD F4-1820cc 1.8L SOHC (1995)
Alignment: Service and Repair
Rear Wheel Toe-In
REAR WHEEL TOE-IN (FWD MODEL)
-
Inspection
Using a toe gauge, measure rear wheel toe-in.
Toe-in: 0 ± 3 mm (0 ± 0.12 in)
2) Mark rear sides of left and right tires at height corresponding to center of spindles and measure distance "B" between marks.
3) Move vehicle forward so that marks line up with front sides at height corresponding to center of spindles.
4) Measure distance "A" between left and right marks.
Toe-in can then be obtained by the following equation:
B-A Toe-in
-
Adjustment
1) Remove cap from lateral link and loosen self-locking nut.
CAUTION:
-
When loosening or tightening adjustment bolt, hold bolt head and loosen self-locking nut.
-
Replace self-locking nut with a new one.
