Impreza Coupe FWD F4-1820cc 1.8L SOHC (1995)
2) Using two wrenches, turn adjusting wheel and adjusting bolt equally in opposite directions so that toe-in is at the middle value of specification.
NOTE:
-
When toe-ins for left and right wheels are adjusted at the same time moving one scale graduation changes toe-in by approximately 4 mm
(0.16 in.)
-
Turn adjusting wheel and adjusting bolt equally in opposite directions so that same scale graduations are positioned directly above center
of the adjusting boll.
3) Tighten self-locking nut.
Tightening torque:
137 ± 20 Nm (14 ± 2 kg-m, 101 ± 14 ft-Ib.)