Impreza Coupe FWD F4-1820cc 1.8L SOHC (1995)
-
If primer has dropped on body finish, it is hard to wipe it off. So protect with masking.
-
Primer must not project from black frame of glass.
-
After applying primer, let it dry spontaneously for about 10 minutes.
5. Application of adhesive
1. Cut nozzle tip as shown in figure.
2. Open cartridge and put it into a gun with nozzle attached.
3. Apply adhesive uniformly to all sides of adhesion surface while operating gun along glass end face.
6. Installation of glass
1. Hold glass with rubber suction cups.
2. Mount glass on body with matching pin aligned.
3. Stick them fast by pressing all sides lightly.
7. Water leakage test
After installing glass, test for water leakage after about one hour.
CAUTION:
-
Move vehicle slowly.
-
When opening and closing door, lower door glass and move door gently.
-
Do not squirt strong hose stream on vehicle.
8. Spontaneous drying
After completing all operations, leave vehicle alone for 24 hours.
CAUTION: When delivering vehicle to user, tell him or her that vehicle should not be subjected to heavy shocks for at least three days.