Impreza GT F4-2.5L Turbo (2009)
IMMOBILIZER INTERFACE ANTENNA PLACEMENT CLIP INSTALLATION
(1) Locate the previously installed immobilizer interface antenna ring at the vehicle's ignition cylinder (FIGURE D). Remove any electrical tape that may
have been used to secure the immobilizer interface antenna ring previously.
(2) When installing the immobilizer interface antenna placement clip, the alignment ears will be oriented towards the steering column. (FIGURE E)
(3) The immobilizer interface antenna placement clip will be inserted from the top left side of the ignition switch (when facing the key insertion side of
the switch) over the previously installed immobilizer interface antenna ring allowing it to fit into the channel on the underside of the placement clip.
(FIGURES F & G)
(4) Insert the immobilizer interface antenna ring placement clip back slightly towards the steering column (to limit interference with the multifunction
switch assembly) and rotate downwards around the ignition cylinder. (FIGURES F & G, above)