Impreza GT F4-2.5L Turbo (2009)
Front Door Panel: Service and Repair
Front Sealing Cover
FRONT SEALING COVER
REMOVAL
1. Disconnect the ground cable from the battery.
2. Remove the front door trim.
3. Remove the sealing cover.
NOTE:
-
Carefully remove the butyl tape. Excessive force will easily break the cover.
-
If cover gets broken, replace it with a new part.
INSTALLATION
1. Install in the reverse order of removal.
2. When replacing the sealing cover, use the butyl tape.
3. Press the butyl tape-applied area firmly to prevent any floating on surface.
Butyl tape: 3M8626 or the equivalent
NOTE:
-
Apply a uniform bead of butyl tape.
-
Attach the sealing cover, keeping it from becoming wrinkled.
-
Breaks in the bead will allow water leakage and contamination.