Impreza GT F4-2.5L Turbo (2009)
Sunroof / Moonroof Panel: Procedures
GLASS LID
FORCED DRIVE
CAUTION: After a forced operation, make sure to perform an initialize operation. [Ref. to INSPECTION, Sunroof Control System.]
NOTE: If the glass lid does not operate or is not supplied with power, move the glass lid using the hexagon wrench.
1. Remove the spot map light.
2. Insert the hexagon wrench securely until it touches the motor shaft end.
3. Turn the hexagon wrench, and move the glass lid.
-
Turning right, the glass lid open.
-
Turning left, the glass lid close.
