subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Removal and Replacement|Page 1217 > < Removal and Replacement|Page 1215
Page 3
background image

22. Disconnect the PCV hose from the rocker cover.

NOTE:  For the PCV hose affixed with the clamp, fit the depression in the ST with the protrusion of the clamp as shown in the figure below,
unlock the clamp and disconnect.

ST 18353AA000 CLAMP PLIERS

23. Disconnect the air control hose (A) from the wastegate actuator, and loosen the clamp that holds the turbocharger on the intake duct.

-

Except for WRX-SS model

-

WRX-SS model

24. Disconnect the bulkhead harness connectors from the engine harness connectors.

Removal and Replacement|Page 1217 > < Removal and Replacement|Page 1215