Impreza GT F4-2.5L Turbo (2009)
42.5 Nm (4.3 kgf-m, 31.3 ft-lb)
2) Set the turbocharger lower cover, and temporarily tighten the bolts that hold the lower side of the turbocharger lower cover.
3) Install the center exhaust pipe and temporarily tighten the bolt which holds center exhaust pipe to hanger bracket.
4) Temporarily tighten the bolt which holds the center exhaust pipe to the transmission.
5) Install the center exhaust pipe along with the turbocharger cover stay (A) to the turbocharger.
NOTE:
Use a new gasket.
Tightening torque:
42.5 Nm (4.3 kgf-m, 31.3 ft-lb)
6) Install the rear exhaust pipe to center exhaust pipe.
NOTE:
Use a new gasket.
Tightening torque:
18 Nm (1.8 kgf-m, 13.3 ft-lb)
