Impreza GT F4-2.5L Turbo (2009)
3) Lift up the vehicle.
4) Remove the under cover.
5) Remove the front oxygen (A/F) sensor.
6) Remove the exhaust manifold RH lower cover.
7) Remove the bolts and nuts which hold front exhaust pipe assembly onto joint pipe.
8) Remove the center exhaust pipe.
9) Remove the turbocharger.
10) Take off the joint pipe in the upward direction.
INSTALLATION
Install in the reverse order of removal.
NOTE:
Use a new gasket.
Tightening torque:
42.5 Nm (4.3 kgf-m, 31.3 ft-lb)
